LEVOLOR RIVIERA BLINDS PARTS

Levolor produces different versions of their Riviera blind.
Click here to view more information on these variations.

We stock a variety of parts for Levolor Riviera blinds in 1/2" Micro, 1" Mini, 1 3/8" Midi and 2" Maxi slat sizes as well as some parts for other Levolor products in our Repair Department at our location in Bellevue, Washington.

Also, you can order some replacement parts direct from Levolor at no charge for Levolor blinds or shades. Contact information for Levolor parts is located on their website at this address: http://www.levolor.com/support/contact

Levolor Wands

We stock Levolor Tilt Wands for Levolor Riviera blinds in Micro, Mini, Midi and Maxi slat sizes. All of the slat sizes use the same hexagonal Riviera Wand shown above.

We also stock Levolor Tilt Wands for Levolor Mark I and Mark I Cordless blinds, which is the smooth, circular wand shown in the center.

The Levolor Riviera and Mark I Wands start at 10" in length and then increase by 10" increments (10", 20", 30" and on). The maximum length we stock is 60".

You will also need to order an S-Hook and Sleeve set to attach the wand when ordering Levolor Riviera Wands. For instructions with illustrations see this PDF. You do not need an S-Hook and Sleeve with the Mark I Wands.

Additionally, we stock Levolor Tilt Wands for Levolor 1" and 2" Wood blinds, which is the smooth, round wood wand shown on the right above.

The Levolor Wood Wands start at 12" in length and then increase by 12" increments (12", 24", 36" and 48"). The maximum length Levolor makes in wood is 48". For longer lengths, you will need to order the clear Lucite Wands used on the Levolor Riviera blinds, shown on the left above.

When ordering Levolor Wood Wands, we will need to know the color of your Wood Blinds to match the Wands to your blinds.

Levolor Wand Parts

Additionally, we stock the parts to attach the Levolor Riviera blinds to the Tilt Gear stem. You will need one S-Hook and one Sleeve to attach each wand. Click here for the instructions on attaching the wand to your Levolor Riviera. For instructions with illustrations see this PDF.

You do not need either of these with the Levolor Mark I Wand, as it is designed differently and just pushes onto the Tilt Gear through the opening in the end of the Levolor Mark I Wand.

Levolor Riviera Tilt Gears

Levolor Riviera Tilt Gears are easily replaced. Click here for instructions on how to remove the broken tilt gear and to install the new Tilt Gear in its place. We stock Levolor Riviera Tilt Gears for the Micro, Mini, Midi and Maxi slat sizes. Shown below is the Tilt Gear for the 1" Levolor Riviera Classic/Contract Mini and 1-3/8" Midi blind. You may also want to order a new S-Hook and Sleeve set to attach the wand when ordering Levolor Riviera Tilt Gears. For instructions with illustrations see this PDF.

Levolor Riviera Components

We also stock the plastic parts found on Levolor Riviera blinds, including the Lift Cord Tassels for all slat sizes and the Ladder Caps for the bottom rail of Micro and Mini slat sizes. These components come in hundreds of colors so be sure to bring in a sample of one from your blinlds.

Levolor Riviera & Mark I Lift Cord

We stock approximately 36 colors of Levolor Riviera and Mark I Lift Cord. To order the correct color, we suggest that you bring us a piece of your existing Lift Cord to help us match it as closely as possible.

The Lift Cord is easily replaced. Click here for instructions on how to restring your Levolor Riviera or Mark I blind.

Levolor Riviera Valance Clips

We also stock Levolor Riviera Valance Clips for Levolor Riviera blinds in Micro and Mini slat sizes. Shown below are the Valance Clips for Levolor 1" Riviera Miniblinds.

The Old Style Clips came on the market in 1981 and continued through late 1995. The Current Style Clips replaced the Old Style Clips in late 1995 and continue in use today on the Riviera models with a 1 or 2-slat valance

For instructions on how to install Current Style Valance Clips click here.

Levolor Riviera and Mark I Installation Brackets

We also stock Installation Brackets for Levolor Riviera blinds in all of the slat sizes. Shown below is the Installation End Bracket for Levolor 1" and 1-3/8" Riviera Classic & Contract blinds. These brackets come in sets with one Left-hand and one Right-hand bracket per set. For installation instructions click here.

These brackets come in hundreds of colors. To select the color closest to your current blinds see the Levolor Riviera Color Samples here or bring in one of your blinlds.

Shown below is the Installation Center Bracket for Levolor 1" and 1-3/8" Riviera blinds. For installation instructions click here.

Shown below is the Inside Mount Installation Bracket for Levolor Mark I blinds. For installation instructions click here.

Shown below is the Outside Mount Installation Bracket for Levolor Mark I blinds. For installation instructions click here.

If you have any problems or questions about these parts, please contact our Customer Service Department by phone at 425-644-7181, 9:30 - 5:00, Monday through Friday.

Parts are available in our Shop in Bellevue, Washington for pickup.

No out of area shipments available.